Product Description
Outboard Pilot Hydraulic Pack: Includes Point-1 AP Heading and GPS Sensor, NAC-1 Autopilot Computer, PUMP-1 – 0.8L reversible hydraulic pump, hydraulic fitting kit, Standby-Auto button and Micro-C network components.
Part Number: 000-15952-001
Outboard Pilot - Product Description
Outboard Pilot is an MFD Autopilot add-on system designed for boats up to 30ft with single outboard motor. System packs contain everything you need to fit an Autopilot to Hydraulic or Cable steer outboard motors.
Key Features and Selling Points
- Easy to Install, available for both Hydraulic and Cable steer systems
- Dash-mount button for one-touch Auto/Standby activation
- Steer to Heading, Course or Route
- Automatic Turn Patters
- NAC-1 Plug & Socket connectors – no screw terminals or wire stripping necessary
- High efficiency, super-quiet 0.8L hydraulic gear pump
- Add a second Helm station to a boat using the MFD Power steer commands – no need for additional hydraulics + steering wheel.
Everything you need in one box to fit an autopilot to your hydraulic-steer outboard motor, the Outboard Pilot lets you focus on any activity while keeping the boat on course. When connected to a GO XSE Series, NSS evo2 or NSO evo2, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. Easily convert trails to routes – so you can retrace a previous track. The Simrad Outboard Pilot with Point-1AP Compass + GPS is recommended for single outboard set-ups, on boats that are 30 feet and less, in length.
Key Features
- Steer your boat to a heading, waypoint, route or cursor, with control from your Simrad GO XSE Series, NSS evo2, NSO evo2 display.
- “One-touch” route creation from saved trails.
- Repeat your path with automatic turn patterns.
- Recommended for single-outboard setups, on boats that are 30 feet and less, in length.
- VRF (Virtual Rudder Feedback) – simplifies pilot installation -- eliminating the need for a rudder position sensor.
- Easy setup – straightforward guide steps you through first-time install.
- Easy-to-install, plug-and-socket connection – with no complex terminal wiring.
- Supported by Simrad Service and Support program
*In the box:
- NAC-1 Autopilot Computer
- PUMP-1 Hydraulic Pump
- Point-1AP Compass + GPS Sensor
- Hydraulic Pump Fitting Kit - Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.
- Auto/Standby Button - Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.
- NMEA 2000® Networking Kit
